SEA (UK) Ltd offers a comprehensive range of both hydraulic and electro-mechanical electric gate operators for swing gates. If you require speed, we have the fastest underground automatic electric gate systems available anywhere in the world. Or industrial operation, we have the most powerful gate openers with the heaviest duty cycle systems you can find.
The two primary hydraulic categories are the LIBRA and the COMPACT ranges. Four electromechanical systems are available, these are FIELD, ALPHA, BETA and ARM
|
The LIBRA Range
The Mini-Tank automatic gate kit is ideal for light use, domestic gate installations. These operators can be used on a gate leaf of up to 1.8 metres.
Compatable with the Gate 2 control panel with slowdown at the end of travel.
|
 |
|
The Mark-Tank electric gate system is suited to busy domestic, light commerial installations with a 20 mm piston, adjustable ball joint and double locking operators available within the standard range.
A hydraulic locking version is suitable for gates up to 2 metres long and non-locking will operate gates up to 4 metres long.
|
 |
|
The Half-Tank is suitable for automating busy residential and commercial gates.
The maximum length of the gate leaf is 2 metres for the hydraulic locking version and up to 6 metres for the non-locking version when used in conjunction with an additional locking device, for example an electric or magnetic lock. The new design now has a solid aluminium locking cover further enhancing it's security pedigree.
|
 |
|
The Full-Tank is the choice of electric gate opener for automating large and intensively used Industrial gates.
Capable of actuating a gate leaf of up to 7 metres, these powerful units offer a robust and reliable solution for commercial access control.
|
|
|
SEA ELECTRO-MECHANICAL rear mount operators.
Three ranges of rear mount electro-mechanical operators are available.
The Alpha, Beta and ARM. The Alpha operators are high quality operators capable of automation of gate max leaf length of 5500 mm per leaf, available in 240 Vac and 24Vdc versions.
The Beta operators are designed for to automate domestic gates max leaf length of 2000 mm leaf weight of 200 Kg.
The ARM 24Vdc electric gate opener, complete with a crank arm designed for gates with max leaf length of 1800 mm leaf weight of 180 Kg.
All operators utilise current sensing for hightened safety and electronic slowdown at the end of travel for smooth reliable operation. The 24 Vdc operators have an optional battery backup system available on the control panels.
|
BETA and ARM rear mounted gate automation
The Arm and Beta operators are easy to install, reliable
and capable of automating most domestic gates with ease.
Built in physical stops and slowdown at the end of travel
make both these gate operators the perfect place to start.
|
|
|
SEA LYRA Underground Unit
The Compact electric gate range offers a durable discreet automation system that will not detract from the aesthetics of the gate. They offer the fastest underground systems available and being hydraulic handle large gates effortlessly. End of travel slow down means fast and smooth.
Both the 400/800 & 200 models have gate support boxes that allow service to the operator without the need to remove the gate.
|
 |
 |
Compact 400/800
The Compact 400/800 electric gate opener has been designed to operate residential gates up to 4.0 metres long and weighing up to 400/800kg. Models suitable for opening angles from 90 to 180 degrees.
Hydraulic locking can be used on gates up to 2 metres long, non-locking units can be used for gates up to 4.0 metres. |
 |
Compact 200
The Compact 200 model has been specifically designed to automate gates up 2.0 mtrs long, with a gate weight not exceeding 200kg. The operators allow 110 degrees of rotation.
Internal adjustable stops are a particularly useful feature of this model eliminating the need for ground stops. |
|
Both Compact models have open and close pressure valves incorporated into the units allowing the operating pressures to be finely adjusted to suit the gates individual requirement.
Should it be required, a special emergency key which is supplied allows the operator to be put into manual operation.
SEA ELECTRO-MECHANICAL electric gate underground operators.
Field electro-mechanical underground gate operators are now available. The Field operators are capable of gate automation up to a max leaf length of 3500 mm and max leaf weight of 600Kg.
24Vdc and 230 Vac, standard and high speed units are available. All operators utilise current sensing for additional safety and electronic slowdown at the end of travel for smoothness of operation. The 24 Vdc systems are designed for intensive use with an optional battery backup system.
|
Field Underground gate automation
The Field electric gate system is ideal for any domestic gate installations. These operators can be used on gates up to 7.0 metres and 1200 Kgs operating up to 20 times per hour. If your gates open more than 20 times an hour why not use the 24 Volt system which can be opened operated up to 40 times an hour
Built in physical stops and slowdown at the end of travel makes the Field automatic gate system the top in its class. Machined gears not cast, oil not grease filled gear box and electronic slowdown at end of travel for smoothness of operation.
Compare the quality of your system before it is buried in the ground.
|
|
For a more indepth look at SEA accessories and additional technical information why not visit the Italian manufacturers web site at www.seateam.com , click on following link. SEA srl
or call us on:
Midlands: 0121 706 9629
London: 020 8360 8022
|
|
|
Sales, Distribution & Technical:
SEA(UK)Ltd
Unit 6A Olton Wharf
Off Richmond Road
Olton
Solihull, West Midlands.
B92 7RN |
Tel: 0121 706 9629
Fax: 0121 764 5603
Northern Sales Cumbria
Tel: 0845 837 2830
Mob: 07800 745 042
|
| |
Sales & Technical:
SEA(UK)Ltd
Unit 1-4 Grange Mews
RO.28 The Grangeway,
Winchmore Hill
London
N21 2HG
|
Tel: 020 8360 8022
Fax: 020 8364 2516
|
| |
|
|
